Tutorials
Each video builds a complete gauge in Gauge Studio, from a blank face to a design tested on the demo drive. Every click is shown and explained, so you can follow along in another tab.
Tutorial · 12 min
A 1990 MX-5 on a uaEFI
Four different screens built from a blank face, with scales but no needles and a colour for each reading. The main screen shows revs, coolant, oil pressure, AFR and battery at once.
What it covers
- Setting up a uaEFI (rusEFI) and the one CAN setting to turn on in TunerStudio
- Start from scratch, then a scale range for each reading and AFR instead of lambda
- Lit tick, dot and LED scales in place of needles
- Copying a page, and copying pieces with Duplicate
- Swiping between screens and forcing a coolant warning on the demo drive
The four screens
- Main: a lit rev scale, the revs, then coolant, oil pressure, AFR and battery
- Temps: coolant and oil temperature on two scales that rise up the sides
- Mixture: AFR in a ring of lit dots, its last 30 seconds, and the tuning numbers
- Drive: road speed in an LED rev ring, the gear, battery and coolant
Tutorial · 6 min
Midnight GT, a full race gauge
One page made from a blank face in 17 pieces, around a needle and an LED ring that lights with the revs.
What it covers
- Adding a font from the library and using it on the scale
- An LED ring, fine ticks and numbers on the same sweep
- A live rev trace, a rolling gear and two temperature readouts
- A needle, then testing the design on the demo drive